Rear-engine design Totally Explained

Everything about Rear Engine totally explained

In automobile design, a rear-engine design layout places the engine at the rear of the vehicle. The center of gravity of the engine itself is past the rear axle. This isn't to be confused with the center of gravity of the whole vehicle, as an imbalance of such proportions would make it impossible to keep the front wheels on the ground.
Rear engined cars are almost always rear wheel drive, a layout known as RR. The exception is certain high performance four wheel drive models from Porsche.
This layout is chosen for three reasons, packaging, traction, and ease of manufacture:

Since the engine is located at an extremity, the rest of the vehicle can be used for passengers and luggage
Having the engine located over the driven wheels increase downward pressure which is helpful for grip on loose surfaces
The drivetrain can be assembled as a unit and installed easily at the factory - easier than a front wheel drive layout where the driven wheels also steer the car.

The disadvantage of the rear engine configuration is that placing the engine outside the wheelbase can create problems for car handlingas, when the car begins to slide on a corner, the end of the car will tend to want to swing wide and overtake the front — especially under braking. This tendency is referred to as oversteer and creates potential safety issues both for ordinary drivers, and even in racing applications. There are also occasions where expert drivers find such behavior desirable in drifting, a motorsport based on intentional oversteer. Details on the handling characteristics of rear engined cars were prominently featured in the 1965 book Unsafe at Any Speed.
   In addition, even though the rear wheels benefit from the additional traction the added weight of the engine gives, the front wheels still need traction in order to steer the car effectively. For this reason, a rear engined car can also be prone to understeer.
   Most manufacturers have abandoned the rear engined layout apart from Porsche who has gradually developed their design with improvements to the suspension as well as electronic aids to reduce the shortcomings of the layout to acceptable levels.
   On the De Lorean, to compensate for the uneven (35/65) weight distribution caused by the rear-mounted engine, the car had rear wheels with a diameter slightly greater than the front wheels.

Some rear engined cars

BMW 600 and 700

Chevrolet Corvair

De Lorean DMC-12

Dune buggys like for instance the Meyers Manx

FIAT 500, 600, 850, 126 and 133

Hillman Imp

NSU Prinz

Porsche 356, 911 and 959

Mercedes-Benz 130/150/170H

Renault 4CV, Dauphine, Caravelle, R8, R10

Volkswagen Beetle, type 3 'pontoon', Karmann Ghia and type 4 (411/412), as well as the VW Bus and type 181 'Thing'

Tata Nano

Benz Patent motorwagenFurther Information

Get more info on 'Rear Engine'.

External Link Exchanges

Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:

<a href="http://rear-engine_design.totallyexplained.com">Rear-engine design Totally Explained</a>

Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.